New Release - HomeKit-Native Smart Toilet Controller

IntelliBath: The First HomeKit-Native Smart Toilet Controller

Powered by ESP32 · Designed for Apple Home Integration

Apple HomeKit Compatible
WiFi + Bluetooth
ESP32 Powered
Geek Edition · For Tech Enthusiasts

Designed by Senior Software Engineer · Quality Assured

Video Tutorials

From installation to configuration, we've prepared complete video tutorials for you

Smart Toilet Controller Installation Guide

Detailed hardware installation steps including wiring and mounting

Installation Guide

A Symphony of Features at Your Command

IntelliBath is more than a smart toilet; it's a fully integrated part of your smart home ecosystem. Discover the unique features that set it apart.

The IntelliBath Difference

Voice Control with Siri & HomeKit

Simply speak to your iPhone, Apple Watch, or HomePod. Say "Hey Siri, turn on the rear wash" or "Hey Siri, set seat temperature to high." Your toilet is now a hands-free, voice-activated appliance.

Over-the-Air (OTA) Firmware Updates

A feature unheard of in other smart toilets. IntelliBath continuously improves. Receive new features, performance enhancements, and bug fixes automatically, ensuring your smart toilet never becomes obsolete.

Core Functions

  • Rear Wash
  • Front Wash (Lady Wash)
  • Heated Dryer
  • Massage & Pulsate
  • Laxative (Strong Wash for Constipation Relief)
  • Automatic Nozzle Self-Cleaning
  • Open/Close Toilet Lid
  • UV Sterilization
  • Emergency Stop

Precise Adjustments

  • 4-Level Water Pressure Control
  • 4-Level Nozzle Positioning
  • Adjustable Seat Temperature (Off, Low, Med, High)
  • Adjustable Water Temperature (Off, Low, Med, High)
  • Adjustable Dryer Temperature (Off, Low, Med, High)

Smart Controls

  • Toggleable Night Light
  • Energy-Saving Eco Mode
  • System Update via Home App
  • Remote Control via Smartphone
  • Automated Scheduling
  • Voice Control via Siri

Smart Toilet Controller - Setup & User Guide

Welcome to IntelliBath! Follow these steps to connect your device to your home network and add it to Apple HomeKit.

1Prerequisites

  1. Ensure your iPhone or iPad is connected to your home's 2.4GHz Wi-Fi network (5GHz is not supported).
  2. Make sure the toilet seat is powered on.
  3. If this is your first time using the device or you've changed your router, please perform a device reset first (see below).
  4. Download the latest firmware from our installation video guide for detailed setup instructions.

2Wi-Fi Configuration

  1. Open Settings -> Wi-Fi on your iPhone.
  2. Under "Other Networks," find and connect to the hotspot named IntelliBath-Setup.

    Note: Your phone may show a "No Internet Connection" warning. This is normal; please stay connected.

  3. A configuration page should pop up automatically.

    If it doesn't, open Safari and enter http://192.168.4.1 in the address bar.

  4. On the pop-up page:
    • Tap Configure WiFi.
    • Select your home Wi-Fi network (SSID) from the list.
    • Enter your Wi-Fi password.
    • Tap Save.
  5. The device will save the password and reboot to connect to your router. Your phone will disconnect from the hotspot and switch back to your home Wi-Fi.

3Add to Apple Home

  1. Open the Home App on your iPhone.
  2. Tap the + icon in the top right corner and select Add Accessory.
  3. Scan the HomeKit Setup QR Code below.
    HomeKit QR Code

    If the QR code doesn't work, tap "More options..." and select IntelliBath Master from the nearby devices. Manual pairing code: 45622789

  4. Follow the on-screen instructions:
    • If you see an "Uncertified Accessory" warning, tap Add Anyway.
    • Choose a room for the device (e.g., "Bathroom").
    • Name the individual controls (e.g., "Rear Wash," "Dryer").
  5. Done! You can now control your smart toilet with your iPhone.

How to Reset Your Device

If you change your router, the device is unresponsive, or you need to transfer it to someone else, please perform a factory reset.

Visual Guide: How to Reset

Plugged In

→
0

/ 5 times

Step 0 of 50% Complete
  1. Unplug the toilet seat's power cord.
  2. Plug it back in and wait for about 2-3 seconds.
  3. Unplug it again.
  4. Repeat this cycle 5 times.
  5. On the 5th time you plug it in, the device will restore to factory settings, clearing all Wi-Fi and HomeKit pairing info.
  6. You can now find the IntelliBath-Setup hotspot in your Wi-Fi list to start over.

After resetting, be sure to remove the old device tile from your Home App before adding it again.

Frequently Asked Questions (FAQ)

Q: Can't find the `IntelliBath-Setup` hotspot?

A: Please check if the device is powered on. The hotspot will not be visible if the device is already configured. Try performing the device reset procedure.

Q: Accessory is not connecting?

A: 1. Ensure your phone and the device are on the same Wi-Fi network. 2. Make sure the Wi-Fi is a 2.4GHz band. 3. Try restarting your router and the device.

Q: The device is "Not Responding" in the Home App.

A: This could be due to a weak Wi-Fi signal. Try moving your router closer to the device. If controlling remotely, check if your HomePod or Apple TV is online and working correctly.